Licensing & software
This is a Serato DJ Lite hardware unlocked device, meaning it unlocks Serato DJ Lite when connected.
It is also a paid upgrade to Serato DJ Pro device, meaning it requires the purchase & activation of a Serato DJ Pro license, in order to be used with Serato DJ Pro.
You can try Serato DJ Pro, before making a purchase:
Please ensure you have the latest version of Serato DJ Pro installed:
Driver Software
The Numark MixTrack Go does not require manufacturer specific drivers on either Mac & Windows operating systems. Simply connect the device to your PC and launch the latest version of Serato DJ Pro.
| # | NUMARK MIXTRACK GO CONTROL | FUNCTION | SHIFT FUNCTION |
| 1 | PLATTER | Touch top to scratch or jog. Move the outside of the platter to jog | Fast Scrub through deck |
| 2 | TEMPO SLIDER | Adjust tempo/pitch | Ignore Tempo Slider |
| 3 | LEVEL | Adjust channel volume | - |
| 4 | LOAD 1 | Load select track to Deck 1. Double-press to Instant Double |
Toggle between Filter & LOW EQ |
| 5 | MAIN LEVEL | Adjust Master output level | - |
| 6 | BROWSE | Library scroll. Press in to cycle between crates | - |
| 7 | CUE LEVEL | Adjust headphone cue volume | - |
| 8 | LOAD 2 | Load selected track to deck 2 Double-press to Instant Double |
Toggle between Vinyl & Jog mode |
| 9 | USB-C | Connect USB-C to PC | - |
| 10 | HEADPHONE OUT | Connect headphones via 3.5mm audio output | - |
| 11 | SYNC | Toggle Sync on/off | - |
| 12 | PERFORMANCE PADS | SEE PERFORMANCE PADS FOR MORE INFORMATION | - |
| 13 | FILTER/LOW EQ |
Adjusts filter |
- |
| 14 | CROSSFADER | Crossfade audio between channel 1 - 2 | - |
| 15 | FADE FX | Toggle to engage or disengage Fade FX. | Change Fade FX effect |
| 16 | CHANNEL CUE | Press to monitor channel via headphones (per deck) | - |
| 17 | PERFORMANCE MODE | Press to toggle between Performance Pad modes | Shift modifier, which can be held while using another control for secondary SHIFT function |
| 18 | PLAY/PAUSE | Toggle Play/Pause on selected channels | Temp CUE point |
| 19 | CUE | Cues from temp cue point/Set temp cue point | Previous Track |
| 20 | INSTRUMENTAL | Toggle instrumental stems on to quickly isolate instruments in playing track. | Toggle the FX Acapella Echo pad to mute and apply an echo out effect to the vocals in the playing track |
| 21 | ACAPELLA | Toggle Acapella stems on to quickly isolate vocals in playing track |
Toggle the FX Instrumental |
Serato Fade FX
Fade FX automatically applies and effect during crossfader transitions.
Press FADE FX button to arm the feature then move the crossfader. Effects apply progressively as you move the crossfader from one side to the other. Once the crossfader reaches the other side, the transition is complete. The FADE FX stays on allowing you to transition with the same FADE FX setting. Press the button again to turn it off.
Performance Pads
The Numark MixTrack Go comes with 4 Performance Pads, that can be used across 5 different performance pad modes. These consist of:
HOT CUE mode: Pads 1-4 trigger Serato DJ Pro Cue points, and if no Cue point is present on that slot/
pad, pressing that pad will set a Cue point. Holding down the PAD MODE button while pressing a pad will
delete the Cue point from the respective pad/slot.
LOOPS mode: Pads 1-4 trigger triggers an autoloop of variable sizes. Use the loop selection area in the
Serato DJ Pro user interface, to influence the 4 available autoloop sizes.
PAD FX mode: Pads 1-4 applies real-time effects using the performance pads. Hold a pad to activate the effect and release to stop. Hold multiple pads to activate multiple FX. These PAD FX include: Echo, Flanger, Reverb, and Repeater.
SAMPLER mode: Press pads 1-4 in this mode to trigger samples loaded into the Serato DJ Pro Sampler.
STEMS mode: Control features from the Stems Tab, allowing you to utilize real-time audio separation in Serato DJ Pro. Press pad 1 to toggle off/on the Vocal Stem, press pad 2 to toggle off/on the Melody Stem, press pad 3 to toggle off/on the Bass Stem, and press pad 4 to toggle off/on the Drums Stem.