The advantages of using Cue Output routing with Serato Sample are that you can apply FX and individually treat each pad on a separate audio channel. It will also reduce load on the DAW by decreasing the number of instances of Serato Sample that you need to have loaded at one time.
- Open Serato Sample on a MIDI channel in FL Studio as normal and load up your selected sample. Click here if this is your first time using Serato Sample with FL Studio for our quickstart guide.
- Click on the VST wrapper settings button at the top of the Serato Sample plugin window as shown below and select the 'processing' tab. At this point you can select 'auto-map outputs' to automatically designate the next 16 available insert channels to the 16 outputs of Serato Sample. You can also choose which insert channel in FL Studio is assigned to each Serato Sample ouput channel manually. In this example we used 'auto-map outputs' and you can see that the channel 1 output is assigned to insert channel 1 in FL Studio.
- Designate a cue point (pad) for the sample you wish to trigger. Now click on the 'output' button and select the output you want to send audio for that pad to. In this example the red pad 'H' is routed to channel 1. You can see that the audio ouput for this channel has been routed to insert 1 in FL Studio.
* The default channel configuration for the channel output routing in Serato Sample is that channels 1-16 will relate to insert channels 1-16 in FL Studio unless you designate these manually.