macOS 13 Ventura is supported with Serato DJ Pro & Lite 3.0 & higher
You can find the latest versions of DJ Pro & Lite here:
Before updating to macOS 13 Ventura, please take note of whether your device is in the Supported Serato DJ hardware list (meaning you can update to macOS 13 Ventura), or in the Currently unsupported Serato DJ hardware (meaning you should not currently update to macOS 13 Ventura).
Please also check the recent changes to our recommended computer specifications for Pro and Lite respectively.
We strongly recommend you double-check and employ the tweaks in our Optimization guide for your respective software below:
For information on Offical Serato Accessories, please see our macOS 13 Ventura - Official Serato Accessory (OSA) compatibility for Serato DJ Pro article.
NOTE: The devices listed below are reflective of testing done by Serato, using Serato DJ software. Hardware manufacturers may have their own testing criteria to meet. For further information regarding compatibility with other software, please contact your hardware manufacturer directly.
Supported Serato DJ hardware
The following hardware is supported by Serato DJ when used with macOS 13 Ventura. Please ensure you are using the most up-to-date version of Serato DJ software & the latest device drivers to use this hardware.
We also highly recommend updating to the latest firmware for your respective device.
Supported Akai hardware
- Akai Pro AMX
Supported Allen & Heath hardware
- Allen & Heath Xone:43C
Supported Denon DJ hardware
- Denon DJ DS-1
- Denon DJ MC4000
- Denon DJ MC7000
- Denon DJ MC2000
- Denon DJ MC6000 mkII
- Denon DJ MCX8000
- Denon DJ X1800 Prime
- Denon DJ X1850 Prime
- Denon DJ PRIME 4
- Denon DJ PRIME 4+
Supported Gemini hardware
- Gemini Slate 4
- Gemini Slate
Supported Hercules hardware
- Hercules DJControl Jogvision
- Hercules DJControl Starlight
- Hercules DJControl Inpulse 500
- Hercules DJControl Inpulse 300 MK2
- Hercules DJControl Inpulse 200 MK2
- Hercules DJControl Inpulse 200
- Hercules DJControl Inpulse 300
- Hercules DJControl Inpulse T7
Supported Mixars hardware
- Mixars DUO
- Mixars PRIMO
- Mixars QUATTRO
Supported Numark hardware
- Numark Mixstream Pro
- Numark Mixstream Pro +
- Numark Mixstream Pro Go
- Numark DJ2GO2
- Numark DJ2GO2 Touch
- Numark MixDeck Express
- Numark MixDeck Quad
- Numark MixTrack Platinum
- Numark MixTrack Platinum FX
- Numark MixTrack Pro
- Numark MixTrack Pro II
- Numark MixTrack Pro 3
- Numark MixTrack Pro FX
- Numark MixTrack Quad
- Numark N4
- Numark NS6II
- Numark NS7III
- Numark NVII
- Numark NV
- Numark Party Mix
- Numark Party Mix Pro
- Numark Party Mix II
- Numark Party Mix Live
- Numark Scratch
- Numark NS4FX
Supported Pioneer DJ hardware
- Pioneer DJ DJM-A9
- Pioneer DJ DDJ-FLX10
- Pioneer DJ DDJ-FLX4
- Pioneer DJ DDJ-FLX6
- Pioneer DJ DDJ-SB2
- Pioneer DJ DDJ-SB3
- Pioneer DJ DDJ-SR2
- Pioneer DJ DDJ-SX2
- Pioneer DJ DDJ-SX3
- Pioneer DJ DDJ-SZ2
- Pioneer DJ DDJ-1000SRT
- Pioneer DJ DJM-S3
- Pioneer DJ DJM-S5
- Pioneer DJ DJM-S7
- Pioneer DJ DJM-S9
- Pioneer DJ DJM-S11
- Pioneer DJ DJM-V10
- Pioneer DJ XDJ-XZ
- Pioneer DJ XDJ-RX3
- Pioneer DJ DDJ-REV1
- Pioneer DJ DDJ-REV5
- Pioneer DJ DDJ-REV7
- Pioneer DJ DJM-900NXS2 (Serato DJ Pro 3.0.4 or higher)
- Pioneer DJ DJM-850 (4.0.2 driver required)
- Pioneer DJ DJM-900SRT (4.0.2 driver required)
- Pioneer DJ DJM-900NXS (4.0.2 driver required)
- Pioneer DJ DDJ-ERGO
- Pioneer DJ DDJ-S1
- Pioneer DJ DDJ-SB
- Pioneer DJ DDJ-SR
- Pioneer DJ DDJ-SX
- Pioneer DJ DDJ-SZ
- Pioneer DJ DDJ-WeGO
- Pioneer DJ DDJ-WeGO3
Supported Rane hardware
- Rane FOUR
- Rane Seventy
- Rane Seventy A-Trak Signature edition
- Rane Seventy-Two
- Rane Seventy-Two mkII
- Rane MP2015
- Rane ONE
Supported Roland hardware
- Roland DJ-202
- Roland DJ-505
- Roland DJ-808
- Roland DJ-707M (please read this important article)
Supported Reloop hardware
- Reloop Mixon 8 Pro
- Reloop Flux
- Reloop Beatmix 2
- Reloop Beatmix 4
- Reloop Elite
- Reloop Mixon 4
- Reloop RMX-90 DVS
- Reloop Ready
- Reloop TM2
- Reloop TM8
- Reloop TM4
Vestax hardware
Please take note while this hardware does work with Serato DJ software on macOS 13 Ventura, Vestax hardware is discontinued. More information regarding Vestax hardware is available here.
- Vestax VCI-100MKII
- Vestax VCI-300
- Vestax VCI-380
- Vestax VCI-400
- Vestax Typhoon
Currently unsupported Serato DJ Hardware
The following hardware is not supported with Serato DJ software when used with macOS 13 Ventura.
Please do not update your macOS system if using any of the devices below.
Allen & Heath hardware
- Allen & Heath Xone:DB2 (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Allen & Heath Xone:DB4 (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
Korg hardware
- Korg KAOSS DJ (macOS 10.15 & Serato DJ Pro 2.5.5/Serato DJ Lite 1.5.5 recommended)
Novation hardware
- Novation Twitch (OSX 10.10 & Serato DJ 1.9.10 recommended)
Numark hardware
- Numark V7 (macOS 10.12 & Serato DJ Pro 2.3.1 recommended)
- Numark NS7 (macOS 10.12 & Serato DJ Pro 2.3.1 recommended)
- Numark NS7II (macOS 10.12 & Serato DJ Pro 2.3.1 recommended)
- Numark NS6 (macOS 10.14 & Serato DJ Pro 2.5.1 recommended)
- Numark Mixdeck (macOS 10.12 & Serato DJ Pro 2.3.1/Serato DJ Lite 1.3.1 recommended)
- Numark MixTrack Edge (macOS 11 & Serato DJ Pro 2.5.7/Serato DJ Lite 1.5.7 recommended)
Rane hardware
- Rane TTM57mkII (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Rane Sixty-One (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Rane Sixty-Two (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Rane Sixty-Four (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Rane Sixty-Eight (macOS 10.14 & Serato DJ Pro 2.5.5 recommended)
- Rane SL2 (macOS 10.15 & Serato DJ Pro 2.5.5 recommended)
- Rane SL3 (macOS 10.15 & Serato DJ Pro 2.5.5 recommended)
- Rane SL4 (macOS 10.15 & Serato DJ Pro 2.5.5 recommended)